See our Application Charts. Please go here instead. Now let’s test if everything is working. In order to get access to some of the more advanced functions, will need to register and activate the software. Then while your cable is connected to the computer — go Device Manager. It will not work properly if you try running it directly from a floppy or CD. Click [ Options ] and select the correct communicationsport.
|Date Added:||16 February 2005|
|File Size:||41.46 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Go through the same steps as explained above to install this second driver. DO NOT connect cable to your computer yet. To remove older versionssimply delete the shortcuts from vsg Start menu and Desktop and delete the old folders which are normally: Right-click and choose “Update Driver Software”.
If the COM port number is above 4, then we’ll have to change it so it’s between It will not work properly if you try running it directly from a floppy or CD.
If the COM port number is betweenthen everything is fine.
Download the self-installing distribution file. When complete cpm plug in cable into any USB port on your computer and wait for automatic installation to complete. Test Everything is Working. And even if you do upgrade — it can only scan vehicles made up to year If installation fails, see below: VCDS-Lite works with some of our old interfaces vsg many years ago, as well as many 3rd-party interfaces.
Home Contact Support Knowledgebase Downloads.
VAG-COM – Download
Turn the car’s ignition switch ON. If install is successful, move onto Step 2.
All rights are reserved. Ross-Tech is not affiliated with the Volkswagen Kjl409.1 in any way. Use in a commercial environment requires registration. By downloading this software, you acknowledge that this Program is provided “as is” and “with all faults, defects and errors” and that all use of the Program is at your own full risk.
Unextract the file into any folder. Read Fault Codes from some modules. Both bit and bit Windows builds work fine, but if you’re using a 3rd-Party USB interface, keep in mind that it is your interface supplier’s responsibility to provide a driver for his hardware.
The default installation folder is C: This article was helpful.
Click [ Options ] and select the correct communicationsport. Then while your cable is connected to the computer — go Device Manager.
Diagnostic USB Cable Obd2 Obd-ii for Kkl409.1 Vag-com 409.1 AUDI VW SKODA Seat B
Use [ Test] to confirm that the program can use the port and find the interface. Then [ Save ]. Select “Install the software automatically”. Please go here instead. Now let’s test if everything is working.
Only do this when you’re instructed below. No need to start the engine. In order to kml409.1 access to some of the more advanced functions, will need to register and activate the software.